5
Mains fuse (UK only)
This WAC7500 is fitted with an approved
moulded plug. Should it become necessary to
replace the mains fuse, this must be replaced
with a fuse of the same value as indicated on
the plug (identical Ampere specifications).
1
Remove fuse cover and fuse.
2
The replacement fuse must comply with
BS 1362 and have the ASTA approval
mark. If the fuse is lost, contact your dealer
in order to verify the correct type.
3
Refit the fuse cover.
In order to maintain conformity to the EMC
directive, the mains plug on this product must
not be detached from the mains cord.
Notice
Class II equipment symbol
This symbol indicates that the unit has a double
insulation system.
Recycling
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
When you see the crossed-out wheel bin
symbol attached to a product, it means the
product is covered by the European Directive
00/96/EC:
Never dispose of your product with other
household waste. Please inform yourself about
m
Unplug this apparatus during lightning
storms or when unused for long periods
of time.
n
Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
o
Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
Install all batteries correctly, + and - as
marked on the unit.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Remove batteries when the unit is not
used for a long time.
p
Apparatus shall not be exposed to
dripping or splashing.
q
Do not place any sources of danger on
the apparatus (e.g. liquid filled objects,
lighted candles).
r
This product may contain lead and
mercury. Disposal of these materials
may be regulated due to environmental
considerations. For disposal or recycling
information, please contact your local
authorities or the Electronic Industries
Alliance: www.eiae.org.
Warning
Never remove the casing of this WAC7500.
Never lubricate any part of this WAC7500.
Place this WAC7500 on a flat, hard and stable surface.
Never place this WAC7500 on other electrical
equipment.
Only use this WAC7500 indoors. Keep this WAC7500
away from water, moisture and liquid-filled objects.
Keep this WAC7500 away from direct sunlight, naked
flames or heat.
•
•
•
•
•
•
•
•
•
EN
wac7500_um_01eng.indd 5
14-08-08 16:29:26
