Philips Streamium NP3900, Руководство пользователя, Страница: 21 / 55

21
Connect to the home Wi-Fi/wired network
On the unit, select • [Wired (Ethernet)] .
The unit starts to acquire an IP address
»
assigned by the network automatically.
A message appears when the
»
connection is completed successfully.
Tip
The router may fail to assign an IP address, •
if the DHCP (Dynamic Host Configuration
Protocol) is unavailable or disabled on the
router. You may need to enter the IP address
manually, or press
BACK to start re-
connecting.
LAN4 To Modem 12V=1A Reset LAN3 LAN2 LAN1
2/2
Wireless (W
i
F
i
)
Wired (Ethernet)
Press • / repeatedly to select the entry
location;
To enter the desired digits, use the •
alphanumeric buttons on the remote
control; or press / repeatedly.
Note
Ensure that you never enter an IP address that
•
is already assigned to a computer/device on
the network.
Wired connection
Connect to the router by using the Ethernet
cable
1
Select [Yes] , when asked whether to set
up network connection (see ‘First-time
setup’).
2
Use an Ethernet cable to connect the unit
to the router.
NP3900
EN