Philips Streamium MX6000i, Руководство по обслуживанию

Страница: 11 / 88

3-1 3-1
Table 1 – Temp. test
PRELIMINARY
SETUP
MAIN MENU
Display shows
firmware versions
<S> 6000I – xx
SET: yy
5DTC: zz xx
yy
zz ...
...
... region (EU or US)
firmware front processor
firmware 5DTC module
Display Test 1
Display shows
Test pattern 1
Backlight=on
Standby LED=off
Display Test 2
Display shows
Test pattern 2
Backlight=half
Standby LED=on
Temp. Test
Read & display
NTC values and
state of Amp-Flag
(see table 1)
To enter the service test program hold buttons “Disc1” &
“Standby” depressed while connecting the set to mains.
After approx. 6 seconds the firmware version is displayed.
RC
“PC LINK”+“1”
pressed?
RC
“PC LINK”+“2”
pressed?
RC “STOP”
pressed?
RC “1”
pressed?
RC “STOP”
pressed?
RC “STOP”
pressed?
N
Y
N
Y
N
Y
N
N
Y
EEPROM Format
Force modules
to load the
EEPROM with
default values
N
Y
iSIO Test 1
Version report
(see table 2)
N
Y
N N
Y Y
RC “NEXT”
pressed?
RC “NEXT”
pressed?
RC “STOP”
pressed?
iSIO Test 2
PCI/IIC test
(see table 2)
iSIO Test 3
RAM/ROM test
(see table 2)
iSIO Test 4
CVBS test
(see table 2)
N N
Y
RC “STOP”
pressed?
Y
Y
N
Display Test – Test pattern 1
Display Test – Test pattern 2
RC “NEXT”
pressed?
RC “STOP”
pressed?
N N
Y Y
iSIO Test 5
RGB/YUV test
(see table 2)
RC “NEXT”
pressed?
RC “STOP”
pressed?
N N
Y Y
Value
–
Temperature in °C
Temperature in °C
State of amplifier error flag (0 or 1)
Table 2 – iSIO test
Test step
Version report
PCI/IIC test
RAM/ROM test
CVBS test
RGB/YUV test
Digit Description
1 Region Code 1 USA
2 EU
3 AP
4 Australia, NZ, Latam
5 Russia, India
6 China
7 Baltic (plays region 2 and 5)
2 TV System 1 NTSC/PAL
2 PAL/NTSC
3 NTSC/PALn
4 PALm/PAL
3 Menu/AS Language 1 USA
2 EU
3 AP
4 Others
4..6 Architecture Feature Set 001, 002, Refer Version Matrix
003, etc.
7..8 OEM Derivative 00 Philips
01 Grundig
02 Marantz
03 B&O
04 Magnavox
05 Loewe
06 Yamaha
07 Hitachi
08 Audio
09 TV
10 etc.
99 Test purpose
Table 3 – Version Matrix Code (VMC)
Display
Line1: StreamIOm
Line2: xx.xx.xxxx
Line3: VMC x-x-x-xxx-xx
1)
Line1: PCI/IIC COMM
Line2: PASS or FAIL + Error code
Line1: RAM/ROM TEST
Line2: PASS or FAIL + Error code
Line1: CVBS TEST PIC
Line1: RGB/YUV TEST PIC
Remarks
Reads and shows the iSIO firmware version
(line 2) and the Version Matrix Code (line 3).
For meaning of VMC digits see table 3.
Checks communication to PCI/IIC devices.
For meaning of error codes see table 4.
Checks FLASH and SDRAM on StreamIOM.
For meaning of error codes see table 4.
Output of a test picture (Video DAC)
Format CVBS and S-Video
Output of a test picture (Video DAC)
Format RGB or YUV (dep. on set version)
Display
Line1: TEMPERATURE
Line2: STREAMIUM:
Line3: TRANSFORMER:
Line4: AMP-FLAG:
xx
yy
z
Table 4 – Error codes
Error code
0x01
0x02
0x04
0x08
0x10
0x20
0x40
0x80
0x00000001
0x00000002
0x00000003
0x00000004
0x00000005
0x00000006
0x00000007
0x00000008
Description
FSM_PCI_INIT_ERROR
FSM_PCI_MINIPCI_MISSING
FSM_PCI_TRIMEDIA_MISSING
FSM_PCI_PCILAN_MISSING
FSM_PCI_UNKNOWN_DEVICE
FSM_IIC_SA7104_ERROR
FSM_IIC_STV6618_ERROR
FSM_IIC_CS4362_ERROR
FLASH_ERROR_OPEN_FOR_WRITE
FLASH_ERROR_WRITING
FLASH_ERROR_CLOSE_AFTER_WRITE
FLASH_ERROR_OPEN_FOR_READ
FLASH_ERROR_FILE_LENGTH
FLASH_ERROR_WRONG_DATA
FLASH_ERROR_CLOSE_AFTER_READ
FLASH_ERROR_REMOVE_FILE
Region Code
Menu/AS
Language
OEM
Derivative TV System
Architecture
Feature Set
N
Y
N
Y
Y
read patt. =
written patt.
?
N
write & read back
EEPROM
test pattern
Next address
location
Display shows
“NEW”
Wait 1 second
Last
address
location?
Y
N
“STOP”
pressed?
Display shows
“PASS”
EEPROM Test
Display shows
“FAIL”
RC
“PC LINK”+“3”
pressed?
RC
“PC LINK”+“4”
pressed?
RC
“INTERNET”
pressed?
1)
VMC line not displayed on all versions
SERVICE TEST PROGRAM