33
Yes. The maximum distance of Wi-Fi
transmission is 250m measured in open
spaces. However, in a home environment,
where solid obstacles such as walls and
doors are present, the effective transmission
distance is reduced to 50-100m. Reposition
the devices if you experience transmission
problems.
How do I avoid Wi-Fi interferences from
other devices that operate in the same
(2.4GHz) frequency spectrum, such as Dect
phones or bluetooth devices?
Move Wireless Micro Hi-Fi System at
•
least 3m away from such devices.
Use a WEP/WPA encryption key when
•
you create the wireless connection your
PC / home network.
Change the operating channel on the
•
interfering devices.
Turn the devices in different directions to
•
minimize interference.
The wireless firmware update failed, what do
I do?
1
Ensure that the PC is connected to the
Internet.
2
Use an Ethernet cable (sold separately) to
connect Wireless Micro Hi-Fi System to
the PC.
3
On the PC, launch the WADM to update
the firmware.
I have done all the steps described to connect
Wireless Micro Hi-Fi System to my wireless
home network, but Wireless Micro Hi-Fi
System is still not connected.
On Wireless Micro Hi-Fi System,
•
press
MENU
. Select
[Information]
>
[Wireless]
>
[Wireless Mode]
Check
that Wireless Micro Hi-Fi System has
been changed from
Ad hoc mode
to
Infrastructure mode
. Also check that the
SSID, IP address, WEP key, or WPA key
matches the setup of your wireless home
network.
Try to change the SSID on your router
•
to a more unique name to ensure that
14 Troubleshooting
Caution
Never try to repair the system yourself as this
•
will invalidate the warranty.
Do not open the system as there is a risk of
•
electric shock.
If a fault occurs, first check the FAQ points,
•
then consult your dealer or Philips for help.
Wireless Micro Hi-Fi System is connected to
a home network and music skips during play
(from any source including HD), what do I do?
Ensure that the network router is turned
•
on.
Ensure that the network settings are
•
correct for the selected network (see
section ‘Connect to a home network’).
I cannot hear any sound or the sound is poor,
what do I do?
Press
•
+ VOL -
to increase the volume.
Press the
•
MUTE
button again to
reactivate the sound output.
Check that the RCA cable is connected
•
correctly.
Check that you have selected ‘Aux in’
•
as the source on the connected stereo
system.
Check if the volume control of the
•
connected stereo system is adjusted
correctly.
The radio reception is poor, what do I do?
Adjust the antenna for better reception.
•
Increase the distance between Wireless
•
Micro Hi-Fi System and TV or VCR
devices.
Is there a maximum distance of transmission
between a Philips Wireless Music / Micro
Center and Wireless Micro Hi-Fi System for
effective streaming?
English
EN
