Philips SRP3219G/27, Руководство пользователя

Страница: 9 / 32

9
Programming Your Remote
• If NO , continue to press and
release the
VOL
button until
the device turns off to test the
other 9 codes from Step 4. Be
sure to wait approximately
3 seconds after each
VOL
button press to allow the device
time to respond to the code.
When the device turns off, you
have found a code for your
device. Press and release the
same device button pressed in
Step 3. This will store the code
in the remote. Go to Step 7.
NOTE :
• The
VOL
button can be used to
go backwards through each batch
of 10 codes.
• The red indicator light will flash 2
times after testing the first or last
code in each batch of 10.
7. Use the remote to turn the device
back on. Test the buttons on
the remote to see if the device
responds as you would expect.
If the buttons do not operate the
device, return to Step 2 and repeat
this process to search for a better
code to operate the device.
8. Repeat this process for each
device you wish to control.
Controlling Combo Devices
Some combo devices (e.g. TV/VCR, TV/DVD,
DVD/VCR, etc.) will require you to set up two
different device buttons to control both parts
of the combo device. For example, if you have
a TV/DVD combo, you may need to set up one
code under the TV button to control the TV
and a separate code under the DVD button to
control the DVD.