11
Using Your Remote
1. Press and hold down the
SETUP
button on the remote until the
red light on the remote control
turns on. Release the
SETUP
button. The red light will
remain on.
2. Press and release the desired
device button (
TV, DVD, STRM,
AUD
) you would like the
code for.
3. Press and release the
ENTER
button.
4. Press and release the
#1
button.
Count the number of times the
remote light flashes. This is the
number corresponding to the
first digit of the code. Repeat
the process by pressing the
#2, #3
and
#4
buttons for the
remaining digits.
5. Press and release the
ENTER
button to exit this mode.
Code Identification
Reset to Factory
Settings
1. Press and hold down the
SETUP
button on the remote until the
red light on the remote control
turns on. Release the
SETUP
button. The red light will
remain on.
2. Press and release the
MUTE
button.
3. Press and release the number
#0
button. The red indicator light will
flash twice.
SETUP
SETUP
1
1
2
2
3
3
4
4
5
5
6
6
7
7
8
8
9
9
0
0
ENTER
ENTER
0
0
