Philips Speechmike 6294, Руководство по настройке

Страница: 65 / 92

65
CODABA R - ONE DISCRETE LENGTH
CODABAR - TWO DISCRETE LENGTHS
Set Lengths for Codabar
Parameter # L1 = 0x18, L2 = 0x19
Lengths for Codabar may be set for any length, one or two discrete lengths, or lengths
within a specific range. The length of a code refers to the number of characters
(i.e., human readable characters) the code contains. It also includes any start or stop
characters.
One Discrete Length - This option allows you to decode only those codes containing a
selected length. For example, if you select Codabar One Discrete Length, then scan
1, 4, the only Codabar symbols decoded are those containing 14 characters. Numeric
bar codes begin on page 78. If you make an error, or wish to change your selection,
scan the CANCEL bar code on page 80.
Two Discrete Lengths - This option allows you to decode only those codes containing
two selected lengths. For example, if you select Codabar Two Discrete Lengths, then
scan 0, 2, 1, 4, the only Codabar symbols decoded are those containing 2 or 14
characters. Numeric bar codes begin on page 78. If you make an error, or wish to
change your selection, scan the CANCEL bar code on page 80.
Length Within Range - This option allows you to decode a code type within a
specified range. For example, to decode Codabar symbols containing between
4 and 12 characters, first scan Codabar Length Within Range. Then scan 0, 4,
1 and 2 (single digit numbers must