SpeechMike Executive Dictation Kit 6275 Installation and User Manual
4
Installation
System requirements
•
IBM-compatible PC
•
Pentium 166 MHz or better recommended.
•
Minimum of 48 MB RAM recommended
•
Minimum 30 MB free hard disk space
•
USB port
•
Windows 98 SE, Windows Me, Windows 2000 or Windows XP
Hardware installation
Windows ME, Windows 2000 and Windows XP:
1. Turn on your computer and plug the SpeechMike Pro into the USB port.
2. The
New
Hardware
Found
message will be displayed shortly on your screen.
Note
: If this message does not appear, verify whether the USB port is enabled in the
BIOS of your system. See your hardware documentation for details or contact your
hardware vendor.
3. Installation will proceed automatically.
Windows 98 SE
:
Note:
The Windows 98 Second Edition CD contains the USB drivers for the microphone
and loudspeaker only. The drivers for the LED display and dictation buttons must be
installed from the SpeechMike Executive CD before connecting the hardware.
1. Turn on your computer and insert the SpeechMike Executive CD
without
plugging
the SpeechMike Pro into the USB port.
2. Autorun.exe will start. If this program is not run when you insert the SpeechMike
Executive CD, start setup manually by doing the following:
•
Double-click the
My
Computer
icon on the desktop.
•
Double-click the CD-ROM drive icon; you will be shown the contents of the CD.
•
Start the program autorun.exe by double-clicking it.
3. Click
Install
to begin installation. When you are prompted to select the components
you wish to install, select the
Control application
, the
SpeechMike recorder
and
the
SpeechMike driver
. Follow the instructions on the screen to install the software
components.
Note:
During the installation process, the system will ask you for a license key. The
license key for your language version can be found on the CD envelope
.
4. Remove the SpeechMike Executive CD and insert your Windows 98 SE CD.
5. Plug the SpeechMike Pro into the USB port.
