Philips SpaceWice, Руководство пользователя

Страница: 22 / 42

SpaceWise for Office Applications
v. 3.7
21
Philips Lighting North America
12. Path of egress mode for emergency applications
For emergency applications the luminaire can be configured as “path of egress” luminaire wherein
the automatic turn off feature is disabled. The luminaire behaves in accordance with the
commissioned group and the only difference is that it never automatically turns off; instead, if the
space is unoccupied then background light level of 27% will be delivered.
SpaceWise luminaires can also be ordered with a Philips emergency driver option
3
. If this
configuration is purchased then luminaires don’t have to be configured as “path of egress”
because of the built in battery capability of the emergency driver and the non-reliance on the
generator back up system. During emergency, the battery will bypass the sensors and therefore
the luminaire will not shut off automatically. When normal power is restored the luminaire will
behave like a standard SpaceWise system.
The “path of egress” luminaire should be powered on the emergency circuit. As long as
the luminaire is powered an adequate light level will be delivered by the luminaire. The
emergency circuit is usually regulated by the backup generator so the system relies on
the generator’s ability to provide power for at least 90 minutes.
3
For Evokit, emergency backup drivers have to be ordered separately and need to be field installed.
c.
Point to any of the luminaires in the
group and press “lock.”
Wait for LED to stop blinking (apx. 10
seconds) then press “send.”
Red LED on remote will start
blinking.
The luminaire will FLASH twice
and group will turn OFF and ON
once for Daylight calibration.
Group is ready for normal
operation.