Philips Sonicare DiamondClean Smart HX9924/12, Руководство пользователя

Страница: 23 / 58

2
Remove and discard the brush head. Cover the
entire handle with a towel or cloth.
1
2
3
Hold the top of the handle with one hand and
strike the handle housing 0.5 inch above the
bottom end. Strike firmly with a hammer on all 4
sides to eject the end cap.
Note: You may have to hit on the end several
times to break the internal snap connections.
4 Remove the end cap from the toothbrush
handle. If the end cap does not release easily
from the housing, repeat step 3 until the end
cap is released.
5 Holding the handle upside down, press the
shaft down on a hard surface. If the internal
components do not easily release from the
housing, repeat step 3 until the internal
components are released.
6
Remove the rubber battery cover.
23
English