Philips Sonicare DiamondClean HX9352/04, Руководство пользователя, Страница: 13 / 44

Press and hold the power on/off for 2 seconds. You hear 2 beeps to
indicate that the Easy-start feature has been activated.
To deactivate Easy-start:
Press and hold the power on/off for 2 seconds. You hear 1 beep to
indicate that the Easy-start feature has been deactivated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Note: Each of the first 14 brushings must be at least 1 minute in length
to properly move through the Easy-start ramp-up cycle.
Traveling with the appliance
Charging with travel case (specific types only)
1
Place the handle in the charging travel case.
2
Connect the charging travel case to a UL 60950-1 and IEC 60950-1
Listed computer, laptop, USB hub, USB receptacle, or wall adapter.
3 The wall adapter you use with this product, shall have an output
marked Class 2 or the limited power source (LPS) requirements
and compatible with the electrical ratings marked on the travel
case.
4 The battery indication flashes white until your toothbrush is fully
charged.
Important: The wall adapter must be a safe extra low voltage source,
compatible with the electrical ratings marked on the device.
Important: Only toothbrush models HX9330, HX9340, HX9350,
HX9360, HX9370, HX939W, HX939B, HX939P, HX939V, HX939L can
be charged in the travel case. Other products and batteries are not
compatible with the travel case.
Note: It takes at least 24 hours to fully charge your Philips Sonicare.
You do not have to fully charge your handle before first use, as the
handle is pre-charged for first use. However, it is recommended to
fully charge it after first use.
Note: This charger is designed to properly charge only one handle at
a time. The charging base is not compatible with other models of
Philips Sonicare.
13
English