default gateway must be 192.168.2.1.
If you can successfully ping the Wireless Repeater you are now
ready to connect to the Internet!
C
ONFIGURING THE
WIRELESS
REPEATER
The IEEE 802.11g Wireless Repeater can be configured by Internet
Explorer 5.5 or above. Using the web management interface, you
can configure the Wireless Repeater and view statistics to monitor
network activity.
Before you attempt to log into the web-based administration,
please verify the following.
1.
Your browser is configured properly (see below).
2.
Disable any firewall or security software that may be running.
3.
Confirm that you have a good link LED where your computer
is plugged into the Wireless Repeater. If you don’t have a link
light, then try another cable until you get a good link.
Browser Configuration
Confirm your browser is configured for a direct connection to the
Internet using the Ethernet cable that is installed in the computer.
Disable Proxy Connection
You will also need to verify that the HTTP Proxy feature of your
web browser is disabled. This is so that your web browser will be
able to view the Wireless Repeater configuration pages. The
following steps are for Internet Explorer.
Internet Explorer 5.5 or above (For Windows)
1.
Open Internet Explorer. Click
Tools
, and then select
Internet
Options
.
2.
In the Internet Options window, click the
Connections
tab.
3.
Click the
LAN Settings
button.
4.
Clear all the check boxes and click
OK
to save these LAN
settings changes.
5.
Click
OK
again to close the Internet Options window.
Internet Explorer (For Macintosh)
1.
Open Internet Explorer. Click
Explorer/Preferences
.
2.
In the Internet Explorer Preferences window, under
Network
,
select
Proxies
.
3.
Uncheck all check boxes and click
OK
.
Navigating the Web Browser Interface
To access the Wireless Repeater’s
management interface, enter the
Wireless Repeater IP address in your
web browser
http://192.168.1.2
Then click
LOGIN
.
(Default password:
admin
)
Note:
Login passwords are case sensitive.
The home page displays the
Setup Wizard
and
Advanced
Setup
options.
