Philips SNP3000U/10, Руководство пользователя

Страница: 5 / 7

3
Push the slide selector to the
ON
position.
4
Close the battery compartment.
When battery is installed
:
To switch on the Presenter, push the USB receiver into the
•
Presenter and then remove the USB receiver from it.
To switch off the Presenter, push the USB receiver to the end.
•
4 Auto-connect
1
Ensure that your notebook is switched on and active.
2
Ensure that your Presenter is switched on.
If the USB receiver is inserted into your Presenter, release the USB
•
receiver from your Presenter (Fig. 3).
3
Plug the USB receiver into a USB host on your notebook.
Auto-connection starts.
»
If connection is successful, the LED indicator indicates 1 long
»
blink.
If connection fails, the LED indicator indicates 2 long blinks.
»
The LED blinks upon every successful communication between
»
the Presenter and the USB receiver.
Tip
After use, insert the USB receiver into your Presenter for •
storage (Fig. 4).
Upon the
fi rst installation on Mac,
• Keyboard Set Assistant
may appear and prompt that the keyboard cannot be
identi fi ed. Just click
Continue
to fi nish the installation, and
then the Presenter will work accordingly.