manualshive.com logo in svg

Philips Show View VR1600, Руководство пользователя, Страница: 22 / 46

Поделиться
Скачать
Philips Show View VR1600 Скачать руководство пользователя страница 22

— 23 —

Notes:
•   It may take a few seconds to display the

    directory screen while the VCR searches
    for the programme information at step 2.
• Tape Manager is possible with the

cassettes recorded with this VCR only.

• To record the date and time as the

programme title in this VCR's memory,
make sure the VCR's clock is set
correctly before recording.

• To record the programme information in

this VCR's memory, you must record
each programme for over the minimum

    continuous recording time; 5 min. for the

SP mode, 10 min. for the LP mode or 15
min. for the SLP mode.

• After recording a tape with this VCR,

write the tape number on a label and affix
the label to the tape in order to allow you
to find the tape by its number.  The tape
number will be assigned and appear on
the screen once you eject the recorded
tape.

• If the Tape Manager does not show the

content of the inserted tape, wind the tape
to a recent recording and press the TAPE
MANAGER button again.

• The programme information is stored in

this VCR’s memory. If the memory in this
VCR should ever be damaged and the
programme information lost, it is
impossible to restore that information.

• If the VCR finds two tape numbers in one

tape while playing back or searching for
the beginning of a programme, then when
you remove the tape, the tape will be
assigned just one number (smaller
number).

How To Read the Tape Manager Screen

The following information appears on the Tape Manager Screen described above.

INTRODUCTION

The Philips Tape Manager is a very
helpful and powerful assistant.
The Tape Manager will tell you;
- on which tape you find your recorded
  programmes.
- on which tape you find enough blank
  space for new recordings.
Every recording will be memorised
(date, start and stop time, length and
channel) and the tapes will be given
unique numbers to identify  them.

Finding a Title

This function is useful when you wish
to quickly find out what programmes
you have recorded on a tape using this
VCR.  It allows you to select a
programme to watch, and then
automatically searches for the start of
the programme.

1

Load a Recorded Cassette

Insert a recorded cassette.  The tape
will run for a few seconds to search for
the tape number. The tape number is
displayed on the screen for about 5
seconds.

2

Access Title Screen

1 Press VCR.
2 Press TAPE MANAGER. The title

screen will appear.

Note:
• If no cassette is inserted in the VCR,

"FIND TITLE" screen appears. (

✈

P.25)

Current Inserted

  Tape Number

Tape Title

Current displayed

page number

The largest blank space on the tape

Record Channel

number

Detail data of the programme pointed by
the cursor; Recording start and stop time/

Total record time /Tape speed/

Programme Title/Category

Start date

of record

Start time

of record

"*" mark is

displayed at

the current tape

position

M

AIN

 

F

EATURES

   

       

         

    TAPE MANAGER

Total page number

\

]

0013

FOOTBALL

1/  3

BLANK

1:25 (SP)

22 : 00 26.02.01

BBC1

20 : 00 27.02.01

BBC2

21 : 00 28.02.01

BBC

22 : 15 28.02.01

PR.07

08 : 15 15.03.01

BBC1

15 : 00 27.04.01

PR.99

21 : 00

=

22 : 30

1 : 30 (SP)

WORLD CUP

/SPORTS

SELECT: 

5∞

           CONFIRM: OK

END

  : 

TAPE MANAGER

]

0013   FOOTBALL                  1/  3

                            BLANK

1:25  (SP)

     22 : 00      26.02.01               BBC1
     20 : 00      27.02.01               BBC2

21 : 00    28.02.01                 BBC

*

22 : 15       28.02.01              PR.07

 21 : 00

=

22:30               1:30 (SP)

WORLD CUP 2002          /SPORTS

SELECT: 

5∞

                CONFIRM: OK

 END

  : 

TAPE MANAGER

VR1600/58-EN

16/08/2000, 14:56

23

Содержание Show View VR1600















































Отзывы:

Нет отзывов