Philips SHD9200, Руководство пользователя

Страница: 7 / 14

5
EN
3 Get Started
Note
•
Before using the headphones for the first time, charge
the supplied batteries for at least 8 hours. Only
rechargeable NiMH batteries can be charged. Use the
batteries (capacity over 700mAh) to ensure the 20
hours' operating time from fully charged.
•
AAA alkaline batteries can be used to operate the
headphones.
•
Use Philips power adaptor only.
•
If no audio input for over 10 minutes, the transmitter
automatically turns to standby.
•
The docking station does not transmit audio signal
during charge.
•
Digital input only supports PCM (pulse code
modulation).
1
Install/Replace the supplied batteries (Fig.B).
2
Power on the transmitter (Fig.C).
3
Power off the headphones and charge the
headphones (Fig.D).
4
Press
INPUT
to select
ANALOGUE
or
DIGITAL mode (Fig.E).
• In
ANALOGUE
mode, connect the audio
device to LINE IN sockets, then adjust
ATT
(Attenuation of audio input signal)
(Fig.F).
• For portable CD player, MP3 player
or other devices with 3.5mm triport
socket output, connect with RCA to
RCA cable (provided) and RCA to
3.5mm plug adaptor (not provided),
then switch
ATT
to
0dB.
• For Hi-Fi, TV, DVD player or other
devices with RCA socket output,
connect with RCA to RCA cable
(provided), then switch
ATT
to
-8dB
.
• In
DIGITAL
mode, connect the digital
audio device to DIGITAL IN COAXIAL
socket with coaxial cable (not provided)
(Fig.G).
1
Press and hold on the right headphone
for 2 seconds to power on the
headphones (Fig.H).
2
Touch +/- on the right headphone to
adjust the volume (Fig.I).
3
Press the
3D SOUND
button on the right
headphone to activate/deactivate the 3D
sound function (Fig.I).
»
The LED on the transmitter turns on.
Tip
•
You can also adjust the volume on the audio device.