Deactivating the travel lock
1
Press the on/off button for 3 seconds.
The motor starts running to indicate that the
travel lock has been deactivated.
The shaver is now ready for use again.
Note: When you place the shaver in the plugged-
in charger or Jet Clean System, the travel lock is
automatically deactivated.
Replace shaving head holder
For maximum shaving performance, we advise you
to replace the shaving head holder every two years.
To remind you to replace the shaving head holder,
the appliance is equipped with a replacement
reminder which is activated automatically after
approx. two years. The replacement reminder is
repeated at 9 successive shaves or until you reset
the shaver.
Charging
Charging takes approx. 1 hour.
A fully charged shaver has a shaving time of up to 50
minutes.
Charge the shaver before you use it for the first
time and when the display indicates that the battery
is almost empty (see section ‘Battery low’ in chapter
‘The display’).
Quick charge
After the shaver has charged for 5 minutes,
it contains enough energy for one shave.
,
-
English
27
RQ1168_EN_CS2_A6.indd 27
13.7.31 10:30:16 PM
