background image

FEB 2015         © 2015 Philips Selecon All Rights Reserved 

 

 
 
 
 
 
 
 
 
 
 
 
 

 

 
 

 
IMPORTANT! 
Read this manual carefully before attempting to install, operate or maintain the Accent LED Beamshaper.  Follow the 
instructions in this manual.  Philips Selecon accepts no responsibility if the customer fails to do so. 
 
For each customer, operating conditions will vary, sometimes greatly.  Such variations may affect the luminaire’s 
performance.  Philips Selecon has no control over the customer’s unique operating environment.  Hence, Philips Selecon 
makes no representations or warranties concerning the luminaire’s performance under the customer’s actual operating 
conditions.  All operating parameters must be validated for each customer application by the customer’s technical experts

 

Safety Warnings 

 

 
Not for residential use. Maximum ambient temperature 25°C 

 

 
CAUTION: Hot surfaces - avoid contact by persons or materials. 
The Accent LED Beam Shaper has some hot surfaces. Be careful to avoid burns. We suggest the use of leather 
gloves when focusing these luminaires.  

 

 

 

SAFETY – Risk of Electric Shock: Always electrically isolate from mains power before cleaning or servicing. 
 
 
 
CAUTION: Replace the lenses if they have become visibly damaged to such an extent that their effectiveness has 
become impaired, for example by cracks or deep scratches. 
 

 

 
These fixtures are not suitable for outdoor use. They are rated at IP20. 

 
.

8  0.8M 

 

 
The fixture should be at least 2.6 feet /0.8 metres away from the nearest object it is lighting. 
 

= 90

o

 

 
The Accent range can be operated only through a range of angles 90

 either side of horizontal. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Philips Selecon Accent LED Beamshaper 

**OPERATION MANUAL** 

 
THIS INFORMATION IS DESIGNED TO PROVIDE YOU WITH THE INFORMATION  
YOU NEED IMMEDIATELY UPON DELIVERY OF YOUR NEW LUMINAIRE. 
 
If you require further assistance please contact your Philips Selecon dealer. www.seleconlight.com/distributors 

WARRANTY REGISTRATION: 

www.seleconlight.com/warrantyreg

 

 

Take full advantage of the Philips Selecon service commitment and 

register all 

your new luminaires quickly and easily online

 for full after-sales support.

 

Philips Selecon has packaged this product using environmentally friendly packaging.  Please consider either 
reuse of the packaging or dispose of responsibly with your nearest recycling collection agency. 

Содержание Selecon Accent LED Beamshaper

Страница 1: ...f Electric Shock Always electrically isolate from mains power before cleaning or servicing CAUTION Replace the lenses if they have become visibly damaged to such an extent that their effectiveness has become impaired for example by cracks or deep scratches These fixtures are not suitable for outdoor use They are rated at IP20 8 0 8M The fixture should be at least 2 6 feet 0 8 metres away from the ...

Страница 2: ...perature 2700K 3000K 4000K nominal CRI 95 Typical Supply Current at 240V 350mA PAN TILT ADJUSTMENT FOCUSING THE BEAMSHAPER The variable beam of your Accent Beamshaper is altered by adjusting the front and rear lens in relation to each other To move the lenses simply loosen the lens locking knobs and move them into the desired position and then tighten the locking knobs The front lens defines the b...

Страница 3: ... your Philips Selecon distributor for assistance Only replace damaged parts with authorised Philips Selecon Accent spare parts N B Luminaire electrical cable your Accent LED Beamspot is fitted with special heat resistant flexible cable replace with genuine Accent spare part cable kit only please refer to your Selecon distributor Replacement cable kits are supplied complete with necessary terminal ...

Страница 4: ...oes not wish to service repair or replace the defective luminaire it shall refund the purchase price Philips Selecon s sole responsibility is to repair replace or service a luminaire subject to a valid warranty claim Under no circumstance will Philips Selecon be liable for direct indirect incidental special or consequential costs or damages including dismantling and re installation costs loss of o...

Отзывы: