34
8 Registration
Up to 5 handsets can be
registered to one base.
Additional handsets must be
registered to the base before
you can use them.
Note
• The instructions described
below apply specifi cally to
your SE145 handset.
If you wish to register
another manufacturer’s
handset, the instructions
may vary. In this case, please
refer to the manufacturer
of the additional handset.
• The System PIN is required
before you can register or
unregister handsets. The
default PIN is 0000.
8.1 Register a handset
1
At the base, press and hold
for about 3 seconds.
The base station emits a beep
when it is ready to accept
registration.
Note
The base is able to accept
registration from a handset
within 90 seconds.
If is pressed, registration
is cancelled.
2
At the handset, press and
hold
.
is displayed.
3
Enter the system PIN
(default setting 0000) and
press
.
If the base is found and the
PIN is correct, the handset
is registered and assigned
the next available handset
number. This number is
displayed on the handset
along with the time setting.
Note
• The SE145 handset can only
be registered with one base
at a time. If you want to
register the handset with
another base, you must
repeat the registration
process.
Registration
SE145_UK_IR_Index 2_Internet_08.10.07.indd Sec1:34
SE145_UK_IR_Index 2_Internet_08.10.07.indd Sec1:34
08.10.2007 12:03:49
08.10.2007 12:03:49
Содержание SE145
Страница 2: ......
Страница 44: ...42 V View a call log 24 View phonebook entries 21 Index ...
Страница 45: ......