Philips SCF250, Руководство пользователя

Страница: 7 / 102

3 Unreel the required cable length from the cable reservoir
8
and
plug into the mains outlet.
Operation
Warming of baby bottles
1 Turn the click-step control knob
4
to the left to the "
.
" (OFF)
position.
2 Connect the bottle warmer to the mains socket.
The indicator lamp lights green.
3 Fill the beaker with 10 or 20ml water by using the water cup of
the ring
6
.The content is depending on the bottle filling and
start temperature (see Heating Overview on page 100).
4 Place the bottle in the middle of the beaker and put the ring
6
on top of it.
5 Use the click-step control knob
4
to set the correct setting
(see Heating Overview on page 100).
The indicator lamp lights red.
When the right temperature is reached the indicator lamp will light
green.
6 Remove the bottle from the container and turn the control knob
to the "
.
" (OFF) position.
7 Shake the bottle a little to distribute the heat evenly before you
allow your baby to drink.
8 Check that the contents of the bottle are the correct
temperature by pouring a few drops on the back of your hand.
Notes!
-
The ring ensures that the hot steam heats up the bottle extremely
fast to the right temperature. Warming the bottle without the ring,
might result in a wrong temperature, therefore never use the bottle
warmer without the ring.
ENGLISH
7