Philips SC2006, Руководство пользователя

Страница: 29 / 138

Problem Possible cause Solution
You did not shave
the areas to be
treated.
Shave the areas to be treated before you use the
appliance. If shaving causes skin irritation, trim hairs as
short as possible and use a comfortable setting.
The UV filter
of the light exit
window is broken.
If the UV filter of the light exit window is broken, do
not use the appliance anymore. Contact the Consumer
Care Centre in your country, your Philips dealer or a
Philips service centre.
The appliance is
defective.
Contact the Consumer Care Centre in your country,
your Philips dealer or a Philips service centre.
I experience an
unacceptable pain
sensation when I use the
appliance.
You did not shave
the areas to
be treated
Shave the areas to be treated before you use the
appliance. If shaving causes skin irritation, trim hairs as
short as possible and use a comfortable setting.
You treated an
area for which the
appliance is not
intended.
You must not use the appliance on your inner labia,
vagina, anus, nipples, areolas, lips, inside the nostrils and
ears, in the region of your eyes and eyebrows. Men
must not use it on their face or scrotum.
You have used
a light intensity
which is too high
for you.
Reduce the light intensity to a level that is comfortable
for you. See chapter ‘Preparing for use’, section ‘Setting
the light intensity’.
The light exit
window or reddish
filter glass of the
attachment is
broken.
If the light exit window or reddish filter glass of the
facial attachment is broken, do not use the appliance
with this attachment any more. Go to your dealer or
a Philips service centre or contact the Consumer Care
Centre to have the attachment replaced.
The appliance is
not suitable for
your skin colour.
Do not use the appliance if you have a very dark skin.
Do not use it either if your body hair is light blond, red,
grey or white.
The treated areas
become red after the
treatment.
Slight redness
is harmless and
normal and
disappears quickly.
No action required.
The skin reaction after
the treatment lasts
longer than usual.
You have used
a light intensity
which is too high
for you.
Select a lower light intensity the next time. See chapter
‘Preparing for use’, section ‘Setting the light intensity.
If the skin reaction lasts longer than 3 days, contact
your doctor.
The hair-removal results
are not satisfactory.
You have used
a light intensity
which is too low
for you.
Select a higher light intensity the next time.
ENGLISH
29