4
H
OW
TO
USE
THE
BABY
MONITOR
Monitoring baby’s sounds
To use the units to listen to your baby:
• Position the Baby unit at least 1 metre away from the baby so that the microphone (A-1) can pick up
baby’s sounds.
• Set the channel switch to the same position on both units.
• Push the
POWER
switch on the baby unit (A-4) to switch it on.
• Set the
SENSITIVITY
control (A-5) on the Baby unit to about mid-range (5).
• The green
TRANSMIT
light (A-3) lights when a sound is picked up.
• Move away from the Baby unit with the Parent unit.
• Switch on the Parent unit using the Volume control/Off (B-5) and adjust the volume to the level you
prefer.
• If required, re-adjust the
SENSITIVITY
control (A-5) on the Baby unit to set the level at which the
microphone will start to pick up sounds.
When the
SENSITIVITY
control (A-5) is set to 9, the microphone picks up even the softest sounds.
Experiment with different levels until you find the setting that suits you and your baby best.
The green
LINK
light (B-1) lights continuously when the Parent unit and the Baby unit are in touch with
each other.
