Philips Saeco Xsmall HD8745/57, Руководство по эксплуатации

Страница: 11 / 20

• 10 •
Coff ee Grinder Adjustment
W a r n i n g ! T h e g r i n d e r
adjustment knob, inside the
coff ee bean hopper, must be turned
only when the grinder is working. Do
not pour ground and/or instant coff ee
into the coff ee bean hopper.
Do not insert any material
other than coff ee beans into
the hopper. The grinder contains
moving parts that may be dangerous.
Therefore, do not insert fi ngers and/
or other objects. Only adjust the
grinder using the grinder adjustment
key. Turn off the machine by pressing
the ON/OFF button and remove the
plug from the socket before carrying
out any type of operation inside the
coffee bean hopper. Do not pour
coff ee beans when the coff ee grinder
is working.
The machine lets you make slight
adjustments to the coffee grinder to
adapt it to the kind of coff ee used.
This adjustment should be carried out
by adjusting the pin on the inside of the
coffee bean hopper; this pin must be
pressed and turned only with the grinder
adjustment key provided with the coff ee
machine.
Press and turn the pin one notch at a
time. You must brew 2-3 coffees before
you will taste a diff erence.
The reference marks inside the coffee
bean hopper indicate the grind setting.
There are 5 diff erent grind settings to cho-
ose from with the following references:
1 - Coarse Grind
2 - Fine Grind
Adjusting the Brewed Coff ee
The machine allows you to adjust the
amount of brewed coffee according to
your taste and/or the size of your cups.
Each time the “ “ or “ “ buttons
are pressed and released, the machine
brews a pre-set amount of coffee. This
amount may be reprogrammed to your
taste. Each button may be individually
programmed for a specifi c brew setting.
As an example, the following procedure
describes the programming of the small
coffee button “
“, which is normally
associated with espresso coff ee.
• Place a cup under the dispensing
spout.
• Press and hold down the “ “ button;
the “ “ light blinks during this
phase.
• Release the “ “ button when the
amount of coffee in the cup reaches
the desired level.
At this point the button “ “ is pro-
grammed; each time it is pressed and
released, the machine will brew the same
amount of coff ee that was just program-
med.
1
1
2
2
Blinking
Standby
The machine is designed for energy sa-
ving.
After 60 minutes of inactivity, the machi-
nes turns off automatically.
Note: During the turning off
phase, the machine performs
a rinse cycle, if a coff ee product has
been brewed.
To turn the machine on again, simply
press the ON/OFF button; in this case the
machine will go through the rinse cycle
only if the boiler is cold.