• 13 •
Using Pre-ground Coff ee
This function allows using
pre-ground and decaff eina-
ted coff ee.
Pre-ground coffee must be poured into
the appropriate compartment positioned
next to the coff ee bean hopper. Only use
ground coff ee for espresso machines and
never coff ee beans or instant coff ee.
Note:
• If no pre-ground coff ee is poured
into the compartment, only water
will be dispensed;
• If the dose is excessive and 2 or
more measuring scoops of coff ee
are used, the machine will not
brew the product. Also in this case,
the machine will run an empty
cycle and discharge any ground
coffee into the coffee grounds
drawer.
To brew coff ee:
• Press and release the “
“ button until
the pre-ground coff ee function icon is
displayed.
• Lift the pre-ground coffee compart-
ment cover.
• Add
1 only 1 scoop
of pre-ground
coffee to the compartment. Use the
measuring scoop supplied with the
machine to perform this operation.
Then, close the cover.
Warning: Only add pre-ground
coffee to the compartment.
Other substances and objects may
cause severe damage to the machine.
This damage will not be covered by
warranty.
Press and release:
the“
” button for an espresso cof-
fee;
the“
” button for a long coff ee.
• The brewing cycle then starts. After
the prebrewing cycle, coff ee begins to
come out of the dispensing spout.
• Coffee brewing stops automatically
when the pre-programmed level is
reached; however, it is possible to in-
terrupt coff ee brewing by pressing the
button initially pressed.
After dispensing the product, the cof-
fee beans confi guration of the machi-
ne is restored.
Repeat the operations de-
scribed above to brew other
coff ees.
DISPENSING HOT
WATER
Warning: At the beginning,
short spurts of hot water may
come out. Danger of scalding. The hot
water wand may reach high tempera-
tures. Never touch it with bare hands.
Steady on
Steady on
Steady on
When the machine is ready, proceed as
follows:
• Place a container under the steam wand
(Pannarello, if supplied).
• Before dispensing hot water check that
all the lights on the display and on the
control panel are on.