Philips Saeco PicoBaristo SM5460, Руководство пользователя

Страница: 17 / 216

Monthly cleaning of the milk carafe
Only use Philips milk circuit cleaner for this cleaning cycle.
1 Pour the contents of the milk circuit cleaner sachet in the milk carafe. Then fill the milk carafe with
water up to the MAX indication (Fig. 32).
2
Insert the milk carafe into the machine and place a container under the milk dispensing spout.
3
Press the MENU button, select DRINKS and scroll to MILK FROTH. Press the OK button to start
dispensing the cleaning solution.
4 Repeat step 3 until the milk carafe is empty.
5 When the carafe is empty, remove the container and the milk carafe from the machine.
6
Rinse the milk carafe thoroughly and fill it with fresh water up to the MAX level indication.
7
Insert the milk carafe into the machine.
8
Place the container under the milk dispensing spout.
9 Press the MENU button and select MILK FROTH in the DRINKS menu to start the carafe rinsing
cycle.
10
Repeat step 9 until the milk carafe is empty.
11
Repeat steps 6-10.
12
When the machine stops dispensing water, the cleaning cycle is finished.
13 Disassemble all the components and rinse them under a lukewarm tap.
Descaling procedure
Please use Philips descaler only. Under no circumstances should you use a descaler based on sulfuric
acid, hydrochloric acid, sulfamic or acetic acid (vinegar) as this may damage the water circuit in your
machine and not dissolve the limescale properly. Not using the Philips descaler will void your
warranty. Failure to descale the appliance will also void your warranty. You can buy Philips descaling
solution in the online shop at
www.saeco.com/care
.
1 When the machine asks you to descale it (Fig. 33), press the OK button to start. To start descaling
without being prompted by the machine, press the MENU button, scroll to select START CALC
CLEAN and press the OK button to confirm.
-
The display reminds you that you have to insert the milk carafe. Fill the milk carafe with water up
to the MIN level indication. Insert the milk carafe into the machine and open the milk dispensing
spout.
-
The display reminds you that you have to open the milk dispensing spout.
-
The display reminds you that you have to remove the AquaClean filter.
2
Remove the drip tray and the coffee grounds container, empty them and put them back into place.
3
Remove the water tank and empty it.
4 Place a large container (1.5 l) under the coffee dispensing spout.
5 Pour the whole bottle of Philips descaler in the water tank and then fill it with water up to the CALC
CLEAN level (Fig. 34). Then place it back into the machine and press the OK button to confirm.
6
The first phase of the descaling procedure starts. The descaling procedure lasts approx. 30 minutes
and consists of a descaling cycle and a rinsing cycle.
7 Let the machine dispense the descaling solution until the display reminds you that the water tank
is empty.
8 Empty the water tank, rinse it and then refill it with fresh water up to the CALC CLEAN level
indication.
9
Remove and rinse the milk carafe. Fill it with fresh water up to the MIN level indication and reinsert
it into the machine. Then open the milk dispensing spout.
10 Empty the container and place it back under the coffee dispensing spout. Press OK to confirm.
15
English