12
Cannot power up
Insert new batteries. Press
2;
and power up the device.
In case of device error, connect your device to the
computer. Use
Firmware Manager
to restore your device.
Device shows "Memory Full"
Connect your device to the computer. Delete unwanted files.
Unplug safely. Record again.
Symptom
Solution
Troubleshooting
If a fault occurs, first check the points listed in the following pages. For further help and other
troubleshooting tips, please also check out FAQs at
www.philips.com/support
.
If you are unable to find a solution by following these hints, consult your dealer or service center.
WARNING:
Under no circumstances should you try to repair the set yourself, as this will invalidate
the warranty.
SA160_ENGLISH_00.qxd 7/6/05 16:51 Page 12
