English
3
Place the shaver in the holder (1), tilt the shaver
backwards (2) and press down the top cap to
connect the shaver ('click') (3).
The battery symbol on the SmartClean system
starts to flash, which indicates that the shaver is
charging.
4
Press the on/off button on the SmartClean
system to start the cleaning program.
During the cleaning phase, the cleaning symbol
flashes. When the cleaning phase is done (after
approx. 10 minutes), the cleaning symbol lights
up continuously.
Next, the ready symbol lights up continuously.
30 minutes after the cleaning program and
charging are done, the SmartClean system
switches off automatically.
The battery symbol lights up continuously
to indicate that the shaver is fully charged.
Charging takes approx. 1 hour.
5
To let the shaver dry, you can leave it in the
SmartClean system until your next shave.
You can also remove the shaver from the
SmartClean system, shake off excess fluid,
open the shaving unit and let the shaver air-dry.
Press to open the SmartClean system cap, to
be able to remove the shaver from the holder
('click').
Note: If you press the on/off button of the
SmartClean system during the cleaning program,
the program stops. In this case, the cleaning or
drying symbol goes out.
Note: If you disconnect the SmartClean system
from its power supply, the cleaning program stops.
1
2
3
42
s6680̲26̲en̲a6̲cs6̲0220.indd 42
2019/02/19 12:08
