English
Problem
Possible cause
Solution
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see
'Replacement'). Then
separate the cutter from its
guard and rinse each
matching set under the tap.
After rinsing, place the
cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
I replaced the
shaving heads,
but the
replacement
reminder is still
showing.
You have not reset
the appliance.
Reset the appliance by
pressing the on/off button
for approx. 7 seconds.
A shaving head
symbol has
suddenly
appeared on the
display.
This symbol is a
replacement
reminder.
Replace the shaving heads
(see 'Replacement').
Water is leaking
from the bottom
of the appliance.
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
38
S5200Series_3SKU_EN_A6_CS6_0511.indd 38
17/05/11 19:31
