4
2. Setting up the monitor
Connect to either WiFi or Ethernet for
SmartMonitor input
1. Connect your WiFi through WiFi dongle
bundled or connect RJ-45 LAN cable to
your LAN port.
2. Connect power cord to SmartMonitor
firmly and press the power on.
3. The SmartMonitor turns on and enters the
previous source input. selected
4. Press the input button to select
SmartMonitor source.
Adjusting view angle
For optimal viewing, it is recommended to look
at the full face of the monitor, then adjust the
monitor’s angle to your own preference.
The monitor's tilted angle is adjustable to 20°
or 62°.
20°
62°
Note
• Do not touch the LCD screen when you
adjust the angle. It may cause damage or
break the LCD screen.
• Careful attention is required not to catch
your fingers or hands when you adjust the
angle.
• Tilted angle equal or over 20° is
recommended with a fixed point to lock
the stand.
• Do not adjust the tilt angle less than
20°. The monitor may fall caused by the
instability.
2.2 Operating the monitor
SmartMonitor allows you to either use it as
a stand-alone SmartMonitor under Android
system without any PC connection required, or
as a normal PC monitor connecting with PC.
By selecting the buttons on the front bezel, you
can choose the mode you want to use.
Front control
3
5
6
2
4
7
Switch monitor’s power ON or
OFF
.
Select the input source:
SmartMonitor, VGA, HDMI.
Adjust the OSD menu.
Hotkey for: SmartImage,
SmartSound, and Volume control.
MENU button for SmartMonitor.
BACK button for SmartMonitor.
Return to previous OSD level.
HOME button for SmartMonitor.
Access the OSD menu for VGA
and HDMI.
Confirm the OSD adjustment
for VGA and HDMI.
