Philips RQ1257, Инструкция по эксплуатации

Страница: 44 / 60

3 Press the on/off button on the shaver to switch it on.
4 You can now start styling your beard.
Using the Beard styler attachment without comb
You can use the Beard Styler attachment without the comb to contour
your beard, moustache or sideburns.
1 Pull the comb off the Beard Styler attachment.
Note: Grab the comb in the centre to pull it off the Beard Styler attachment.
Do not pull at the sides of the comb.
2 Press the on/off button to switch on the shaver.
3 You can now start contouring your beard, moustache, sideburns or
neckline.
Beard styles
Below you fi nd some examples of beard styles you can create.
- A stubble look
- A full beard
- A moustache
- A goatee
Cleaning and maintenance
Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the shaver, its accessories and the Jet
Clean System (RQ1295CC, RQ1257CC only).
The best and most hygienic way to clean the shaver is in the Jet -
Clean System (RQ1295CC, RQ1257CC only). You can also rinse the
shaver under the tap or clean it with the cleaning brush supplied.
Be careful with hot water. Always check if the water is not too hot, to -
prevent your hands from getting burnt.
Clean the shaver after every shave for optimal shaving performance. -
You can clean the outside of the shaver with a damp cloth. -
Regular cleaning guarantees better shaving performance. -
English English