26
Large comb
attachment
6
1 2/16
28
7
1 3/16
30
2
Attach the comb attachment to the swivel head (‘click’) (Fig. 7).
Make sure that the comb attachment locks into position properly.
3
Turn the length setting adjustment ring to set the comb attachment
to the desired setting (Fig. 8).
The arrowhead on the appliance indicates which setting you have
selected.
Tip: Use different settings to create a natural and smooth transition between
the various hair lengths from your neckline to the top of your head (Fig. 9).
Do not turn the length setting adjustment ring beyond the highest setting.
4
Turn the swivel head to the position that is most comfortable for
your arm when you clip the different parts of your head.
Using the swivel head
From its starting position of 0° (pointing forwards), you can turn the
swivel head 45° or 90° to the left or right. This enables you to adjust the
position of the cutting element to the part of your head that you are
clipping. This makes it much easier to clip your own hair (Fig. 10).
To set the cutting element to the desired position, turn the swivel
head (‘click’) (Fig. 11).
Note: Always adjust the position of the cutting element by turning the swivel
head. Do not turn the swivel head by holding the cutting element or the comb
attachment.
Note: Do not turn the swivel head more than 90° to the left or right.
The swivel head allows you to hold and use the appliance like a styling
comb (Fig. 12).
5
Press the on/off button to switch on the appliance.
6
Move the clipper through the hair slowly.
,
-
-
-
English
Large comb
attachment
6
1 2/16
28
7
1 3/16
30
2
Attach the comb attachment to the swivel head (‘click’) (Fig. 7).
Make sure that the comb attachment locks into position properly.
3
Turn the length setting adjustment ring to set the comb attachment
to the desired setting (Fig. 8).
The arrowhead on the appliance indicates which setting you have
selected.
Tip: Use different settings to create a natural and smooth transition between
the various hair lengths from your neckline to the top of your head (Fig. 9).
Do not turn the length setting adjustment ring beyond the highest setting.
4
Turn the swivel head to the position that is most comfortable for
your arm when you clip the different parts of your head.
Using the swivel head
From its starting position of 0° (pointing forwards), you can turn the
swivel head 45° or 90° to the left or right. This enables you to adjust the
position of the cutting element to the part of your head that you are
clipping. This makes it much easier to clip your own hair (Fig. 10).
To set the cutting element to the desired position, turn the swivel
head (‘click’) (Fig. 11).
Note: Always adjust the position of the cutting element by turning the swivel
head. Do not turn the swivel head by holding the cutting element or the comb
attachment.
Note: Do not turn the swivel head more than 90° to the left or right.
The swivel head allows you to hold and use the appliance like a styling
comb (Fig. 12).
5
Press the on/off button to switch on the appliance.
6
Move the clipper through the hair slowly.
,
-
-
-
7
Regularly remove cut hair from the comb attachment.
If a lot of hair has accumulated in the comb attachment, remove the comb
attachment from the appliance and blow and/or shake the hair out of it.
When you remove the comb attachment, the selected setting does not
change.
Tips
We advise you to start clipping at the highest setting of the large comb
attachment and to reduce the setting gradually.
To clip most effectively, move the appliance against the hair growth
direction.
Since all hair does not grow in the same direction, you need to
move the appliance in different directions (upwards, downwards and
across) (Fig. 13).
Make sure that the flat part of the comb attachment is always fully in
contact with the scalp to obtain an even result.
Write down the settings you use to create a certain hairstyle as a
reminder for future clipping sessions.
Contouring without comb attachment
You can use the appliance without comb attachment to clip your hair very
close to the skin (1mm) or to contour the neckline and the area around the
ears.
Be careful when you clip without comb attachment because the cutting
element removes every hair it touches.
1
Pull the comb attachment off the swivel head (Fig. 14).
Never pull at the flexible top of the comb attachment. Always pull at the
bottom part.
2
Comb the hair ends over the ears before you start to contour the
hairline.
3
Press the on/off button to switch on the appliance.
4
When you shape the contours around the ears, tilt the appliance in
such a way that only one edge of the cutting element touches the hair
ends (Fig. 15).
-
-
-
-
-
English
