Mechanical Instructions
EN 10
Q528.1E LA
4.
Important:
For (older) FTV sets without these "mushrooms", it
is obligatory to use the provided screws, otherwise it is possible
to damage the monitor inside!
4.3
Assy/Panel Removal
4.3.1
Rear Cover
Warning:
Disconnect the mains power cord before you remove
the rear cover.
Note:
it is
not
necessary to remove the stand while removing
the rear cover.
Refer to next figures for details.
Figure 4-5 Rear Cover Removal
1.
Place the TV set upside down on a table top, using the
foam bars (see part “Foam Bars”).
Caution:
do
not
put pressure on the display, but let the
monitor lean on the Front cover!
2.
Remove the mushrooms [1].
3.
Remove the screws [2].
4.
Open the covers [3] on the back cover.
5.
Unplug connectors [4].
6.
Lift the rear cover from the TV. Make sure that wires and
flat coils are not damaged while lifting the rear cover from
the set.
Figure 4-6 Cover Removal -1-
H_16800_108.eps
110507
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
1
1
3
H_16800_109.eps
090507
4
