17
16
ENGLISH
Cleaning the Shaving Unit
The shaver heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗
Regular cleaning guarantees better shaving
results.
◗
Do not immerse shaver in water.
◗
While rinsing shaver heads, water may drip
out of the base of shaver. This is a normal
occurrence.
1
Always turn shaver OFF, unplug from
outlet and remove power cord from
shaver.
C
2
Press the Shaver Head Release Button to
open the Shaver Head Assembly.
C
3
Clean inside shaver heads and hair
chamber by running under hot water.
C
4
Clean outside of Shaver Head Assembly by
running under hot water.
5
Close the Shaver Head Assembly and
shake off excess water.
ENGLISH
Be careful not to hit the shaving unit against
anything while shaking off excess water.
6
Open Shaver Head Assembly again and
leave open to air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue. This could damage the
shaving heads.
◗
If the shaving unit becomes detached from the
shaver, you can easily reattach it.
◗
You may also clean the hair chamber without
water by using the supplied brush.
Extra-thorough Cleaning Method
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1
Turn shaver OFF, remove the charging plug
from the outlet and power cord from the
shaver.
C
2
Press the Shaver Head Release Button to
open the Shaver Head Assembly.
