firmware upgrade
occasionally, philips releases new software (“firmware”) for your set.
1
connect the mains adapter to
DC
on the set and to the wall socket (see “mains
adapter”).
2
keep mode pressed for 3 seconds.
the type of your set and the current version of the firmware are displayed.
Upgrade?
is displayed.
3
press
9
.
4
visit the homepage
http://www.nike-philips.com.
check if there is a firmware file for
your set and if the firmware version is higher than the current version of your set.
download the file and burn it on a cd-rom.
5
insert the cd-rom into the set and keep mode pressed for 3 seconds.
Upgrade?
is displayed.
6
press
2;
.
Upgrading
is displayed and upgrading starts. this may take some minutes. after
upgrading is finished
,
Upgrade complete
is scrolled.
Wrong upgrade file
is scrolled: your set already has the latest firmware or the
downloaded file does not correspond to your set.
Upgrade file defect
is scrolled: the upgrade file has been damaged during the
download or when burning the cd-rom. download the file again, burn a new cd-rom
and try again.
No upgrade file
is scrolled: no upgrade file was found on the inserted cd-rom.
note: if upgrading is interrupted accidentally, repeat step 6 until upgrading
is completed successfully.
general information
9
act400_eng 22/7/02 15:13 Page 9
All manuals and user guides at all-guides.com
