Philips PS1966C122, Техническая сервисная информация

Страница: 4 / 79

5. To select an option code or option byte in SDM, use the Menu Up or Menu Down keys on the remote
control.
6. To change the value of an option code, use the Menu Left or Menu Right keys.
7. To change the value of an option byte, use the Menu Left or Menu Right keys, or enter the new value
using the numeric keys on the remote control.
8. Press the Status button on the remote control to toggle the OSD (except ”SDM“) ON and OFF to
prevent the OSD from interfering with measurements and oscilloscope waveforms.
9. Press the Menu button on the remote control while in SDM to switch the software to a Virtual
Customer Mode; the text "SDM" will still be displayed in the upper right corner of the screen. In this
mode, all customer menu adjustments to the set can be made. From the Virtual Customer Mode,
press the Menu button to return to the SDM display.
10. To exit the Service Default Mode and erase the error codes, turn the unit off with the Power button on
the remote control, then unplug the ac cord.
11. To exit the Service Default Mode and save the error codes, unplug the ac cord to turn off the set.
When the set is turned on again, the Service Default Mode will still be active.
Explanation of Display:
Run Timer
The run timer counts the normal operation hours, not the standby hours. The actual value of the run timer
is displayed in SDM and CSM. The run timer displays hours in hexadecimal format. This display will
increment based on the amount of time the set has been on. The timer will also be incremented one hour
each time the set is turned on.
Software Identification, Cluster, and Version
The software identification, cluster, and version will be shown in the service main menu display.
These numbers consist of the last part of the customer identification printed on the IC package; the
screen will show ”AAABBC-X.Y“. (Example: L90US1 1.2)
−
AAA is the engineering project name (Ex: L90 = L9.0).
−
BB is a function specification indicating specific functionality or a region (Ex: US). Processors with the
same engineering project name and function name are interchangeable, except for the languages
they support.
−
C is the language cluster number within the ”BB“ software version (Ex: 1 = English/Spanish/French)
−
X is the main version number (Ex: 1)