manualshive.com logo in svg

Philips PLPF4-01-14, Инструкция по установке и эксплуатации

Поделиться
Скачать
Philips PLPF4-01-14 Скачать руководство пользователя страница 13

Mounting

11

PLPROFILE4 LED Luminaires

Installation & User’s Manual

5. Mounting

WARNING!  

Before attempting any installation or service, disconnect all power at power source. Dimming the 

luminaire does not disconnect power. Installation and service should only be performed by a trained and qualified 
professional.

Using Supplied C-Clamp

As illustrated in 

Figure 3 on page 11

, at yoke assembly, thread clamp mounting bolt (with washer installed) through

center clamp mounting hole at top of yoke, through Top Box Assembly, and thread bolt into C-Clamp. Securely
tighten bolt (by hand) into clamp (but do not overtighten).

Figure 3:  Luminaire Mounting

To mount on a telescopic stand, reverse the yoke under the luminaire and bolt to stand. Please note luminaire
orientation (see note in 

Figure 3

).

Note:  

After installing Clamp and Top Box assembly, connect luminaire cable assembly to Top Box Assembly before 

mounting luminaire. Please note that the cable connector is keyed.

Yoke Assembly

Center Clamp Mounting Hole

Luminaire Cooling Vents

NOTE:

 To allow for proper cooling, make sure

luminaire head is orientated as shown (with
cooling vents pointed upwards).

Top Box Assembly

C-Clamp

Flat Washer

C-Clamp Bolt

Top Box Assembly

Luminaire Cable 
Assembly

Содержание PLPF4-01-14













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды