Philips PICO BARISTO AMF, Руководство по обслуживанию

Страница: 32 / 58

PICO BARISTO 05 SERVICE MODE
1/11
5.1 Test Mode PICOBARISTO AMF-OTC
Introduction
This document describes the Test Mode of the PicoBaristo (AMF & OTC) Coffee Machine. This ap-
plication is used in order to test the machine in its mechanics and electronic components.
To enter Test Mode
The machine enters in Test mode by holding pressed together A and L buttons while switching on
the machine by the main switch on the backside of the CA.
Once entered in Test Mode, the display shows the firmware version (Page 0).
A H
L
M
N
I
D F
G
E
B
C
Introduction
This document describes the Test Mode of the PicoBaristo (AMF & OTC) Coffee Machine. This ap-
plication is used in order to test the machine in its mechanics and electronic components.
To enter Test Mode
The machine enters in Test mode by holding pressed together “Espresso” and “Aroma Strength”
buttons while switching on the machine by the main switch on the backside of the CA.
Once entered in Test Mode, the display shows the firmware version (Page 0).
The Test Mode is organized into 6 different pages, each level the coffee machine can execute dif -
ferent commands:
Page 0:
The display shows:
a) Machine’s model (PicoBar AMF, PicoBar OTC).
b) Firmware’s version.
c) Voltage of PCB.
d) Main supply frequency (50 or 60 Hz).
Page 1: Keyboard and display colors testing:
1) A backlight Red
2) B button
3) C button
4) D button
5) E button
6) F button
7) G button
8) H button
9) I button
10) L button
11) M button
12) N button