14
EN
3
Press
/
/ / to set the value, and
then press
OK
.
Note
•
If the PhotoFrame is disconnected from the power
supply for a long time, you need set time and date again
after you turn on the PhotoFrame.
Set SmartPower timer
With the SmartPower timer, you can configure
the time for the display of the PhotoFrame to
turn on or turn off automatically. When the
display automatically turns off, the PhotoFrame
goes to standby (sleep) mode.
Note
•
Make sure that the current time of the PhotoFrame is
set correctly.
1
Select
[SmartPower]
, and then press
OK
.
2
Select
[Set On-Time]
/
[Set Off-Time]
,
and then press
OK
.
3
Move the joystick up/down/right/left to set
time, and then press
OK
.
•
To switch off the SmartPower function,
select
[Off]
and then press
OK
.
Tip
•
When the PhotoFrame is in standby (sleep) mode, you
can press to wake up the PhotoFrame.
Hibernate the PhotoFrame
1
Select
[Hibernate]
, and then press
OK
.
2
Select an option, and then press
OK
.
»
After the selected period, the
PhotoFrame hibernates.
•
To disable the hibernation function,
select
[Never]
and then press
OK
.
•
To wake up the PhotoFrame, press .
SPF1528_12_UM_V1.0.indd 14
7/16/2012 4:12:50 PM
