Philips PET941, Руководство пользователя

Страница: 7 / 23

7
Warning
Never remove the casing of this apparatus.
‡
Never lubricate any part of this apparatus.
‡
Never place this apparatus on other electrical equipment.
‡
.HHSWKLVDSSDUDWXVDZD\IURPGLUHFWVXQOLJKWQDNHGÁDPHVRUKHDW ‡
Never look into the laser beam inside this apparatus.
‡
Ensure that you always have easy access to the power cord, plug or adaptor to
‡
disconnect this apparatus from the power.
Hearing sa f ety
Listen at a moderate volume.
Using headphones at a high volume can impair your hearing. This
‡
product can produce sounds in decibel ranges that may cause hearing
loss for a normal person, even for exposure less than a minute. The
higher decibel ranges are offered for those that may have already
experienced some hearing loss.
Sound can be deceiving. Over time your hearing ‘comfort level’ adapts
‡
to higher volumes of sound. So after prolonged listening, what sounds
‘normal’ can actually be loud and harmful to your hearing. To guard
against this, set your volume to a safe level before your hearing adapts
and leave it there.
To establish a sa f e volume level:
Set your volume control at a low setting.
‡
Slowly increase the sound until you can hear it comfortably and clearly,
‡
without distortion.
Listen f or reasonable periods o f time:
Prolonged exposure to sound, even at normally ‘safe’ levels, can also
‡
cause hearing loss.
Be sure to use your equipment reasonably and take appropriate breaks.
‡
Be sure to observe the f ollowing guidelines when using your headphones.
Listen at reasonable volumes for reasonable periods of time. ‡
Be careful not to adjust the volume as your hearing adapts. ‡
Do not turn up the volume so high that you can’t hear what’s around you.
‡
You should use caution or temporarily discontinue use in potentially
‡
hazardous situations. Do not use headphones while operating a
PRWRUL]HGYHKLFOHF\FOLQJVNDWHERDUGLQJHWFLWPD\FUHDWHDWUDIÀF
hazard and is illegal in many areas.
English
EN