Philips PET1031, Руководство пользователя

Страница: 28 / 30

Disc can’t be played • Ensure the disc label is upwards.
• Clean the disc.
• Check if the disc is defective by trying
another disc.
The player does not
respond to the remote
control Aim the remote control directly at the
sensor on the front of the player. Avoid all
obstacles that may interfere with the signal
path. Inspect or replace the batteries.
Distorted or B/W pic-
ture with DVD Use only discs formatted according to the
TV-set used (PAL/NTSC).
No audio at digital output • Check the digital connections.
Player does not respond
to all operating com-
mands during playback
• Operations are not permitted by the disc.
• Refer to the instructions in the disc inlay.
Cannot detect USB
plug-in • Unplug the USB connection and plug-in
again. Detection may take some time that
vary with the capacity of your USB device.
• The DVD player only support Mass Storage
(MSC) format from USB flash drive.
• The DVD player does not support Hard
Disk storage or Media Transfer Protocol
(MTP) format.
Switch between
DVD/USB • DVD mode is default source during the
DVD player power on.
• Plug in USB will activate USB mode.
Deactivate it by unplug the connection.
• Unplug the connection before you plug-
in another connection.
Player feels warm When the player is in use for a long period of
time, the surface will be heated.This is normal.
Display goes dimmer
when AC is unplugged The unit is saving power to ensure longer
playtime with battery. It is normal. Adjust
the brightness in the
SETUP menu.