Philips PerfectCare Xpress GC5000 series, Руководство пользователя

Страница: 6 / 54

6
Table of contents
Important 6
Introduction 7
Product overview 8
Before first use 8
Using the appliance 8
Checking the water hardness 8
Filling the water tank 9
Heating up 9
Temperature and steam setting 10
Ironing 11
Putting down the iron during ironing 12
ECO mode (specific types only) 12
Ironing tips 12
Safety Auto-off 12
Cleaning and maintenance 13
Storage 13
Troubleshooting 13
Overview of models 15
important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
- Never immerse the appliance in water.
Warning
- Check if the voltage indicated on the type plate corresponds to the
local mains voltage before you connect the appliance.
- Check to make sure the wall socket has the correct rating (16A)
before you connect the appliance.
- Do not use the appliance if the plug, the mains cord or the appliance
itself shows visible damage, or if the appliance has been dropped
or leaks.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
- Never leave the appliance unattended when it is connected to the mains.
- This appliance can be used by children aged 8 or above and by
persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given instructions in
safe use of the appliance or supervision to establish safe use and if they
have been made aware of the hazards involved.
- Do not allow children to play with the appliance.
- Keep the appliance and its mains cord out of the reach of children
aged 8 or under when the appliance is switched on or cooling down.
- Children are not allowed to clean the appliance without supervision.
- Do not let the mains cord come into contact with the hot soleplate of
the iron.
Caution
- Only connect the appliance to an earthed wall socket.
- Always place and use the appliance on a stable, level and horizontal
surface. If you prefer to place the iron on its heel, make sure that you
place it on a stable surface.
- Check the mains cord regularly for possible damage.
EnGlish