Philips Perfect replacement SRC2063WM, Руководство пользователя

Страница: 8 / 44

8 EN
During initial setup
1
Make sure the receiving device is able to
respond. E.g. when you try to repair the Play
button for your DVD player, make sure to
insert a DVD into the DVD player otherwise
the Play button is not able to function.
2
Press the button that does not function, keep
it pressed and immediately release it when
the device responds. Repeat this for every
button that does not function.
• If the button still does not function as
expected, try pressing it again for a longer
period of time.
After initial setup
1
Make sure the receiving device is able to
respond. E.g. when you try to repair the Play
button for your DVD player, make sure to
insert a DVD into the DVD player otherwise
the Play button is not able to function.
2
Select the device
that you wish to
operate (e.g. DVD).
Press the or
device selection
button to select
DVD.
3 Keep buttons
and pressed
simultaneously for
5 seconds
.
• The red Setup
light lights
up. The remote control is now in setup
mode.
4 Press and hold
the button that does not
function and
immediately
release it when the
device responds.
• If the button still does not function as
expected, try pressing it again for a longer
period of time.
5
Press the or
selection button
twice
to save your
settings and exit
setup mode.
• When no
button is pressed for 5 minutes or more,
the remote control will exit setup mode,
automatically saving all your settings.
5 sec.
2 x
SRP2063WM_17__Manual 8 25-11-09 13:11