Philips PCA82CR, Руководство пользователя

Страница: 20 / 47

3
5
This chapter contains detailed instructions to guide
you through the installation of your new CD-ROM drive.
To install the drive, your PC must have at least one
free IDE interface connector. If not, you need to go
to a computer retailer and buy an IDE controller card
(an Enhanced IDE controller card is needed if your PC
already has a one-port IDE controller). See
Appendix
A for a brief introduction to IDE connections.
3.1 Installing the CD-ROM Drive
Here’s how to install your CD-ROM drive:
1. Adjust the Master/Slave jumpers on the back of
the CD-ROM drive as necessary. (The factory
setting of the slave mode meets most people’s
needs and normally does not need to be changed.
See Appendix A.)
2. Disconnect the power to your PC and remove your
PC's casing.
3. Slide the CD-ROM drive into the mounting rails
of a 5.25” drive bay.
INSTALLING YOUR
DRIVE
3