Philips OR 7200, Руководство пользователя

Страница: 10 / 30

•
a BS 1362 approval, and
•
the ASTA approval mark.
Contact your dealer if you are not sure about what type of fuse to use.
Caution: To conform with the EMC directive (2004/108/EC), do not
detach the plug from the power cord.
How to connect a plug
The wires in the power cord are colored as follows: blue = neutral
(N), brown = live (L).
If the colors do not correspond with the colors on your plug, identify
the terminals in your plug as follows:
1
Connect the blue wire to the terminal marked N or colored
black.
2
Connect the brown wire to the terminal marked L or colored
red.
3
Do not connect either wire to the earth terminal in the plug,
marked E (or e) or colored green (or green and yellow).
Before you replace the plug cover, make sure that the cord grip is
clamped over the sheath of the cable and not just over the two wires
in the cable.
2 What’s in the box (Fig. 1)
3 Connect power (Fig. 2-1)
4 Turn on (Fig. 2-2)
Press the knob or turn the
SOURCE
knob.
»
The product switches to the last selected source.
•
To switch the product to standby mode, press the
knob again.