Philips NTX800, Руководство пользователя

Страница: 15 / 26

13
EN
Note
•
Shuffle play cannot be selected when you play the
programmed tracks.
Program tracks
You can program a maximum of 20 tracks.
1
In Disc or USB A mode, press to stop
playing.
2
Press PROG to activate the program mode.
»
A number flashes on the screen.
3
For MP3 tracks, press
ALB//-
to
select an album.
4
Press or to select a track number,
then press PROG to confirm selection.
5
Repeat steps 3 to 4 to program other
tracks.
6
Press to play the programmed track.
• To erase the program, press twice.
Note
•
The function is not available in USB B mode.
Play audio through Bluetooth
The product can stream music from your
Bluetooth device to the system through
Bluetooth.
Connect a device
Note
•
Before pairing a device with this product, read its user
manual for Bluetooth compatibility.
•
Make sure that Bluetooth function is enabled on your
device, and your device is set as visible to all other
Bluetooth devices.
•
The operational range between this product and a
Bluetooth device is approximately 10 meters (30 feet).
•
Any obstacle between this product and a Bluetooth
device can reduce the operational range. Keep away from
any other electronic device that may cause interference.
Option 1: Connect a device through NFC
Near Field Communication (NFC) is a
technology that enables short-range wireless
communication between various NFC
compatible devices, such as mobile phones and
IC tags.
If your Bluetooth device supports NFC, you can
connect it with this speaker easily.
1
Enable NFC on your Bluetooth device
(refer to its user manual).
2
Press Bluetooth to select BT source.
»
[BT] (BT) is displayed, then [SEARCH]
(search) begins to flash.
» The Bluetooth indicator flashes.
3
Tap the NFC tag on the top of the product
with the NFC area of your Bluetooth
device.
4
On your Bluetooth device, accept the
pairing request with "
PHILIPS NTX800
".
5
Follow the on-screen instructions to
complete the pairing and connection.
»
After successful connection, the
Bluetooth indicator turns solid blue.
Option 2: Connect a device manually
1
Slide CROSS FADER to the far left.
2
On your Bluetooth device, enable
Bluetooth and search for Bluetooth devices
that can be paired (see the user manual of
the device).
3
Press
Bluetooth
repeatedly to select BT
source.
»
[BT] (BT) is displayed, then [SEARCH]
(search) begins to flash.
»
The Bluetooth indicator flashes.