Philips NT1150/10, Руководство пользователя

Страница: 25 / 32

23 24
Do not tap on the cutting element.
Do not use any sharp objects to clean the cutting
element.
1
Make sure the appliance is switched off.
2
Rinse the cutting element of the nose/
ear/eyebrow trimming head with hot
water (Fig. 12) .
3
Switch on the appliance and rinse the cutting
element once more to remove any remaining
hairs. Then switch off the appliance again.
Tip: The best way to clean the cutting element is
to immerse it in a glass with warm water for a few
minutes and then switch on the appliance (Fig. 13) .
4
Let all parts dry completely before you use
the appliance again.
Replacement
To buy accessories or spare parts, visit
www.
shop.philips.com/service
or go to your Philips
dealer. You can also contact the Philips Consumer
Care Centre in your country (see the worldwide
guarantee leafl et for contact details).
ENGLISH
Storage
1
Place the protection cap on the nose/ear/
eyebrow trimming head (Fig. 14) .
Environment
- This symbol on a product means that the
product is covered by European Directive
2012/19/EU (Fig. 15) .
- This symbol means that the product contains
batteries covered by European Directive
2006/66/EC which cannot be disposed of with
normal household waste (Fig. 16) .
- Inform yourself about the local separate
collection system for electrical and electronic
products and batteries. Follow local rules and
never dispose of the product and batteries
with normal household waste. Correct disposal
of old products and batteries helps prevent
negative consequences for the environment
and human health.
ENGLISH
NT1150-10̲A7̲JP̲cs6.indd 24 14/12/08 14:10