Philips NT1140/15, Руководство пользователя

Страница: 24 / 32

23
1 Make sure the appliance is switched off.
2 Rinse the cutting element of the trimming head
with hot water (Fig. 13).
3 Switch on the appliance and rinse the cutting
element once more to remove any remaining
hairs. Then switch off the appliance again.
If rinsing the trimming head under the tap is not
sufficient, immerse the cutting element in a
glass with warm water for a few minutes (Fig.
14). Then switch on the appliance and rinse it
under the tap.
4 Let all parts dry completely before you use the
appliance again.
Replacement
Replace damaged parts immediately. Always
replace them with original Philips parts.
Ordering accessories
To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the
international warranty leaflet for contact details).
Recycling
-
Do not throw away the product with the normal
English