Attaching and detaching guards
1 To attach any type of guard onto a
cutting element,
slide the front part of
the guard onto the teeth and push the
projection at the back of the guard into
the product ('click') (Fig. 6).
2 To detach any type of guard from the
cutting element, carefully pull its back
part off the product and then slide it off
the cutting element (Fig. 7).
Note: When trimming for the first time,
start by using the guard with the
maximum trimming length setting to
familiarize yourself with the product.
Switching the product on and off
Push the on/off slide up to turn the product
on or down to turn the product off.
Attachments for use on beard
Beard guards
Attach a beard guard to the full-size hair
trimmer to trim your beard and moustache
evenly. The product comes with 5 beard
guards. The hair length settings are
indicated on the guards. The settings
correspond to the remaining hair length
after trimming.
Guard
inch
mm
Stubble
guard
3/64in.
1mm
Stubble
guard
5/64in.
2mm
Beard guard 1/8in.
3mm
Beard guard 3/16in.
5mm
Beard guard 9/32in.
7mm
1 Attach the guard to the full-size hair
trimmer.
2 To trim the most effective way, move the
guard against the direction of hair growth
(Fig. 11). Make sure the surface of the
guard always stays in contact with the
skin.
Attachments for use on head
Full-size hair trimmer
Use the full-size hair trimmer without a
guard to trim hair close to the skin (to a
length of 1/32in./0.5mm) or to create clean
lines around your beard, neck and
sideburns.
1 To trim hair close to the skin, place the
flat side of the cutting element against
your skin and make strokes against the
direction of hair growth (Fig. 8).
2 For contouring, hold the cutting element
perpendicular to the skin and move it
upwards or downwards with gentle
pressure (Fig. 9).
Hair guards
Attach a hair guard to the extra-wide hair
trimmer to evenly trim the hairs on your
head. The product comes with 3 hair guards.
The hair length settings are indicated on the
guards. The settings correspond to the
remaining hair length after trimming.
Guard
inch
mm
Hair guard
3/8in.
9mm
Hair guard
15/32in.
12mm
Hair guard
21/32in.
16mm
1 Attach a guard to the extra-wide hair
trimmer.
2 Move the trimmer slowly over the crown
from different directions to achieve an
even result. Make sure the surface of the
guard always stays in contact with the
skin.
-
Always move the trimmer against the
direction of hair growth (Fig. 10). Press
lightly.
-
Make overlapping passes over the
head to ensure that all hair that
should be cut has been cut.
Precision attachments for use on face
Precision trimmer
Use the precision trimmer to create fine
lines and contours around your facial style,
close to the skin (to a length of
1/32in./0.5mm).
1 Hold the precision trimming head
perpendicular to the skin and move the
trimming head upwards or downwards
with gentle pressure (Fig. 12).
