ENGLISH
C
3
Remove protective razor head cap from
razor.
C
4
Place the razor head side down in the
razor holder with the display facing the
front of the Jet Clean System. Press the
razor tightly into the holder of the Jet
Clean System to lock into place.
The battery symbol on the Jet Clean System goes
on to indicate the razor automatically begins to
charge.
C
5
Press the ON/OFF button to start the
cleaning cycle.
C
6
The battery symbol on the Jet Clean
System goes out, the cleaning symbol starts
to blink and the razor is automatically
lowered into the cleaning solution.
The razor stops charging while it is being cleaned.
◗
During the first phase of the cleaning cycle,
the razor will automatically turn on and off
several times while the razor holder lowers
and raises the razor’s position in the cleaning
solution, removing all debris. This phase will
take approximately 8 minutes and the cleaning
light blinks continuously.
24
ENGLISH
C
◗
During the second phase of the cleaning cycle,
the razor holder moves the razor to the
drying position and the drying light will blink.
This phase will take approximately 4 hours.
◗
Do not press the ON/OFF button while the
cleaning cycle is running. If this does occur,
the cleaning cycle will stop and the razor
holder will automatically move to the starting
position. The cleaning cycle can be re-started
by pressing the ON/OFF button once.
◗
If the power plug is disconnected before the
cleaning cycle is complete, the razor holder will
remain in its current position. Reconnect the
plug into the outlet or Jet Clean System and the
razor holder will automatically move to the
highest position. The cleaning cycle can be
re-started by pressing the ON/OFF button
once.
C
NOTE: If the cleaning solution level drops below
the minimum level during the cleaning cycle,
the cleaning and ‘cleaning solution low’ lights
will blink and razor holder returns the razor
to the starting position, stopping the cleaning
cycle. Unplug Jet Clean System from the outlet,
remove razor and refill canister (see “Preparing
Jet Clean System for Use”).
7
When the entire cleaning cycle is complete
and the razor is hygienically clean, the razor
will be raised to the starting position and
the battery symbol on the Jet Clean System
will turn on indicating that the razor is
(re)charging.
25
