ADD: You can add a new NetCam DVR. You can also add a backup file as a
resource. All the backup files of the NetCam DVR can be only be accessed
through NetCam DVR Viewer.
■
Select ‘IP(Remote)’ button to add
a new NetCam DVR. Enter the
IP address and name.
■
Select‘File(Local)’ button to add a
backup file. Enter the file name
and path, then the designated
name.
REMOVE & EDIT: You
can
remove or edit an existing resource. Change the IP
address or the name of the NetCam DVR. You can
also remove the NetCam DVR.
Password:
After you connect, you may have to enter a
password if this option has been enabled. You can
change the password at the ‘Config’ menu.
22
NetCam DVR
Section 3
DVR_NC_ii_98911_0047.qxd 12/13/00 1:53 PM Page 22
