Philips MCV250, Руководство пользователя

Страница: 19 / 26

19
MCV250/21-1
English
Radio Reception
Tuning to radio stations
1
Select TUNER source.
➜
“
TUNER
” is displayed briefly.
2
Press BAND to select the desired waveband :
FM or MW.
3
Press and hold
S
or
¢
and then release it.
➜
The display will show "
SEARCH
" until a radio
station with sufficient signal strength is found.
➜
If a FM station is received in stereo, is
shown.
4
Repeat step
3
if necessary until you find the
desired station.
●
To tune to a weak station, press
S
or
¢
briefly and repeatedly until you have found
optimal reception.
Programming radio stations
You can store up to 40 radio stations in the
memory.
Automatic programming
Press PROGRAM for more than two seconds
to activate programming.
➜
All available stations are programmed.
➜
AUTO
is displayed and available stations are
programmed in order of waveband reception
strength: FM followed by MW The last preset
automatically stored will then be played.
Manual programming
1
Tune to your desired station (refer to “Tuning to
radio stations”).
2
Press
PROGRAM
to activate programming.
➜
prog
flashes on the display.
3
Press
4
or
3
to allocate a number from 1 to 40
for this station.
4
Press PROGRAM again to confirm the setting.
➜
prog disappears, the preset number and the
frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.
Deleting preset radio stations
●
Press and hold
Ç
until “
CLR ALL
” is displayed.
➜
All preset radio stations will be deleted.
IS DBB DSC
ALBUM ALBUM
VCD/CD TUNER TAPE AUX
ECHO
KEY PROG